Yes, We Can Bore Under Your Driveway (Without Cracking It)

The problem

The line you need — water to the garage, power to the far side of the property, irrigation to the island beds — has a driveway, sidewalk, or patio sitting in the middle of the route. The old answer was a concrete saw, a trench through the slab, and a patch you'd look at forever.

The bore answer

We set up on one side, bore underneath the slab, and come up on the other. The drill head passes a few feet below the concrete, deep enough that nothing above moves. Your driveway doesn't know it happened.

What cutting actually costs

• The saw cut and removal — labor plus disposal of the broken slab.
• The patch — new concrete or asphalt that never quite matches the rest.
• The seam — every patch has edges, and edges settle, crack, and heave with Northern Michigan frost.
• Doing it again — a settled patch is a redo, not a repair.

None of those exist on a bore. The crossing portion of a job often pays for the boring choice by itself.

Common crossings we do

• Irrigation lines under driveways and sidewalks — a standard part of sprinkler installs and repairs.
• Water and power to detached garages and pole barns on the far side of pavement.
• Conduit under roads and private drives for fiber and electrical — same method, bigger scale. We've crossed everything from a two-track to state highways.

What it looks like

A small pit on each side of the slab, the drill parked at one end, and an hour or two of boring for a typical residential crossing. The line comes up exactly where your plumber, electrician, or irrigation contractor needs it.

Have a crossing in your project? Get a free estimate — mark the driveway on the map tool and we'll quote the whole run — or call (231) 264-0757.